Studio Technologies M206 Dante Announcer Console

Integrates directly into both Dante audio-over-Ethernet and standard analog audio environments.

More Details

Key Specs

Power Source:

Power-over-Ethernet (PoE): class 2 (low power, = 6.49 watts)

Network Audio Technology:

Type: Dante audio-over-Ethernet
AES67-2013

‍

Includes

Rent

Studio Technologies M206 Dante Announcer Console

ST Model 206

back to all rentals

Similar Items

No items found.

RENT-TO-BUY INFO

Studio Technologies M206 Dante Announcer Console

item in stock

items in stock

Rent

Studio Technologies M206 Dante Announcer Console

Integrates directly into both Dante audio-over-Ethernet and standard analog audio environments.

view data sheet

More Details

All Rental Rates

Specifications

Network Audio Technology:

Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 44.1 and 48 kHz
Number of Transmitter (Output) Channels: 4
Number of Receiver (Input) Channels: 4
Dante Audio Flows: 4; 2 transmitter, 2 receiver

Network Interface:

Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet(PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s GigE Ethernet not supported)

Microphone Input:

Compatibility: dynamic or phantom-powered microphones
Type: balanced, capacitive coupled
Impedance: 3.1 k ohms, nominal
Gain: 35, 43, 52, 59 dB, selectable
Frequency Response: 25 Hz to 20 kHz, –3 dB
Distortion (THD+N): <0.018%, measured at 35 dB of gain
Dynamic Range: 98 dB, A-weighted
Phantom Power: P48 per IEC 61938 standard, on/off selectable with status LED

Compressor:

Application: applies to Dante main and talkback transmitter (output) channels
Threshold: 1 dB above nominal level (–19 dBFS)
Slope: 2:1
Status LED: compressor active

Microphone Output:

Type: passive via two 200 ohm resistors from microphone input (will pass phantom power in either direction)
Muting: solid-state relay contacts, 60 dB attenuation @ 1 kHz

Headphone Output:

Type: 2-channel (stereo)
Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.0 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, +0/–1 dB
Distortion (THD+N): <0.008%
Dynamic Range: >102 dB

Remote Control Inputs: 2

Function: configurable, can mimic the action of the main and talkback button functions
Type: active low, 1 mA maximum, input pulled up to 3.3 volts DC via 3.4 k ohm resistors
Limitation: Remote Control Input 1 shares hardware pin with Main Out Tally (only one function can be configured to be active at a time)

Main Out Tally:

Functions: follows the status of the main output
Type: active high, 3.3 volts DC in series with 142 ohm resistor (23 mA maximum)
Limitation: Main Out Tally shares hardware pin with Remote Control Input 1 (only one function can be configured to be active at a time)

Connectors:

Microphone Input: 3-pin female XLR
Microphone Output: 3-pin male XLR
Headphone Output: 3-conductor ¼-inch jack
Remote Control Inputs: 3-conductor 3.5 mm jack
Ethernet: Neutrik etherCON RJ45
USB: type A receptacle (located inside Model 206’s enclosure and used only for updating firmware)

Configuration: uses Studio Technologies’ STcontroller personal computer application

Dimensions (Overall):

4.3 inches wide (10.9 cm)
2.1 inches high (5.4 cm)
5.1 inches deep (13.0 cm)

Deployment: intended for tabletop applications

Weight: 1.2 pounds (0.55 kg)

Product Description

The Model 206 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that's intended for table-top use. Calling the Model 206 "cute" or "cool" would be accurate; its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 206 supports Dante^® audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 206's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation.

Key Features

Dante audio-over-Ethernet technology
Digital audio and direct-microphone outputs
One main and three talkback output channels
Highly-flexible 2-channel headphone output
Compact unit supports one on-air location
Excellent audio quality
Uses STcontroller for configuration
Power-over-Ethernet (PoE) powered

‍

view data sheet

Specifications

Network Audio Technology:

Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 44.1 and 48 kHz
Number of Transmitter (Output) Channels: 4
Number of Receiver (Input) Channels: 4
Dante Audio Flows: 4; 2 transmitter, 2 receiver

Network Interface:

Type: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet(PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s GigE Ethernet not supported)

Microphone Input:

Compatibility: dynamic or phantom-powered microphones
Type: balanced, capacitive coupled
Impedance: 3.1 k ohms, nominal
Gain: 35, 43, 52, 59 dB, selectable
Frequency Response: 25 Hz to 20 kHz, –3 dB
Distortion (THD+N): <0.018%, measured at 35 dB of gain
Dynamic Range: 98 dB, A-weighted
Phantom Power: P48 per IEC 61938 standard, on/off selectable with status LED

Compressor:

Application: applies to Dante main and talkback transmitter (output) channels
Threshold: 1 dB above nominal level (–19 dBFS)
Slope: 2:1
Status LED: compressor active

Microphone Output:

Type: passive via two 200 ohm resistors from microphone input (will pass phantom power in either direction)
Muting: solid-state relay contacts, 60 dB attenuation @ 1 kHz

Headphone Output:

Type: 2-channel (stereo)
Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.0 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, +0/–1 dB
Distortion (THD+N): <0.008%
Dynamic Range: >102 dB

Remote Control Inputs: 2

Function: configurable, can mimic the action of the main and talkback button functions
Type: active low, 1 mA maximum, input pulled up to 3.3 volts DC via 3.4 k ohm resistors
Limitation: Remote Control Input 1 shares hardware pin with Main Out Tally (only one function can be configured to be active at a time)

Main Out Tally:

Functions: follows the status of the main output
Type: active high, 3.3 volts DC in series with 142 ohm resistor (23 mA maximum)
Limitation: Main Out Tally shares hardware pin with Remote Control Input 1 (only one function can be configured to be active at a time)

Connectors:

Microphone Input: 3-pin female XLR
Microphone Output: 3-pin male XLR
Headphone Output: 3-conductor ¼-inch jack
Remote Control Inputs: 3-conductor 3.5 mm jack
Ethernet: Neutrik etherCON RJ45
USB: type A receptacle (located inside Model 206’s enclosure and used only for updating firmware)

Configuration: uses Studio Technologies’ STcontroller personal computer application

Dimensions (Overall):

4.3 inches wide (10.9 cm)
2.1 inches high (5.4 cm)
5.1 inches deep (13.0 cm)

Deployment: intended for tabletop applications

Weight: 1.2 pounds (0.55 kg)

Rent

Studio Technologies M206 Dante Announcer Console

.

phone

Interested in Renting Multiple Items?

Get a Quote

Studio Technologies M206 Dante Announcer Console

$

110

$

$

165

$

440

Key Specs

Includes

Similar Items

$

Rent

Studio Technologies M206 Dante Announcer Console

Studio Technologies M206 Dante Announcer Console

$

110

All Rental Rates

$

$

165

$

440

Specifications

Network Audio Technology:

Network Interface:

Microphone Input:

Compressor:

Microphone Output:

Headphone Output:

Remote Control Inputs: 2

Main Out Tally:

Connectors:

Configuration: uses Studio Technologies’ STcontroller personal computer application

Dimensions (Overall):

Deployment: intended for tabletop applications

Weight: 1.2 pounds (0.55 kg)

Product Description

Key Features

Rent

Studio Technologies M206 Dante Announcer Console

Recommended Accessories

Appears in Kits

Combine with Kits

Product Description

Key Features

Specifications

Network Audio Technology:

Network Interface:

Microphone Input:

Compressor:

Microphone Output:

Headphone Output:

Remote Control Inputs: 2

Main Out Tally:

Connectors:

Configuration: uses Studio Technologies’ STcontroller personal computer application

Dimensions (Overall):

Deployment: intended for tabletop applications

Weight: 1.2 pounds (0.55 kg)

.

Call for Advice

Email Sales Department

View Rental Agreement

View Certificate of Insurance

View CC Authorization Form

Interested in Renting Multiple Items?

Call for Advice

Email Sales Department

View Rental Agreement

View Certificate of Insurance

View CC Authorization Form

Interested in Renting Multiple Items?

You May Also Be Interested In